122 Results for : m12x1.0

  • Thumbnail
    Nukeproof Mega 297 Alloy Frame - Grey - Rahmen - Full Suspension MTB
    Specifically designed for the rigours of enduro racing, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted aluminium build for the best balance of strength, durability and performance. Nukeproof has also equipped this model with a RockShox Super Deluxe Ultimate RCT rear shock for smooth and dependable rear end suspension performance as you race across demanding terrain conditions. Thanks to its race-ready geometry that includes internal cable routing, this version delivers a hassle-free, clean finish. One final highlight is its 148x12mm Boost rear hub spacing that increases stiffness and handling as you charge from trail to trail. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Alloy V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. To optimise the strength and weight, the Mega is constructed fully out of T6061-T6 aluminium including all forged parts. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new aluminium chassis ·        Designed and improved suspension kinematics ·        All new geometry ·        Optimised sizing/fit - Small to Large ·        SRAM UDH ·        Now fits a 750ml water bottle inside the main front triangle! The Mega frame is optimised around the rider and weight distribution. The geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required.   Features: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 297 Alloy, 165mm Travel, custom triple butted hydro-formed tube set Internal cable routing ISCG05 mount Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Shock: RockShox Super Deluxe Ultimate RCT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted Headset: Nukeproof, 44-56 IITS Weight: 3.87Kgs/8.53lbs (Medium)
    • Shop: Wiggle DACH
    • Price: 2199.99 EUR excl. shipping
  • Thumbnail
    Nukeproof Mega 297 Alloy Frame - Grey - Rahmen - Full Suspension MTB
    Specifically designed for the rigours of enduro racing, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted aluminium build for the best balance of strength, durability and performance. Nukeproof has also equipped this model with a RockShox Super Deluxe Ultimate RCT rear shock for smooth and dependable rear end suspension performance as you race across demanding terrain conditions. Thanks to its race-ready geometry that includes internal cable routing, this version delivers a hassle-free, clean finish. One final highlight is its 148x12mm Boost rear hub spacing that increases stiffness and handling as you charge from trail to trail. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Alloy V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. To optimise the strength and weight, the Mega is constructed fully out of T6061-T6 aluminium including all forged parts. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new aluminium chassis ·        Designed and improved suspension kinematics ·        All new geometry ·        Optimised sizing/fit - Small to Large ·        SRAM UDH ·        Now fits a 750ml water bottle inside the main front triangle! The Mega frame is optimised around the rider and weight distribution. The geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required.   Features: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 297 Alloy, 165mm Travel, custom triple butted hydro-formed tube set Internal cable routing ISCG05 mount Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Shock: RockShox Super Deluxe Ultimate RCT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted Headset: Nukeproof, 44-56 IITS Weight: 3.87Kgs/8.53lbs (Medium)
    • Shop: Wiggle DACH
    • Price: 2199.99 EUR excl. shipping
  • Thumbnail
    Nukeproof Mega 297 Alloy Frame - Grey - Rahmen - Full Suspension MTB
    Specifically designed for the rigours of enduro racing, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted aluminium build for the best balance of strength, durability and performance. Nukeproof has also equipped this model with a RockShox Super Deluxe Ultimate RCT rear shock for smooth and dependable rear end suspension performance as you race across demanding terrain conditions. Thanks to its race-ready geometry that includes internal cable routing, this version delivers a hassle-free, clean finish. One final highlight is its 148x12mm Boost rear hub spacing that increases stiffness and handling as you charge from trail to trail. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Alloy V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. To optimise the strength and weight, the Mega is constructed fully out of T6061-T6 aluminium including all forged parts. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new aluminium chassis ·        Designed and improved suspension kinematics ·        All new geometry ·        Optimised sizing/fit - Small to Large ·        SRAM UDH ·        Now fits a 750ml water bottle inside the main front triangle! The Mega frame is optimised around the rider and weight distribution. The geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required.   Features: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 297 Alloy, 165mm Travel, custom triple butted hydro-formed tube set Internal cable routing ISCG05 mount Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Shock: RockShox Super Deluxe Ultimate RCT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted Headset: Nukeproof, 44-56 IITS Weight: 3.87Kgs/8.53lbs (Medium)
    • Shop: Wiggle DACH
    • Price: 2199.99 EUR excl. shipping
  • Thumbnail
    Nukeproof - Mega 275 Carbon Frame - Black - Rahmen - Full Suspension MTB
    ◌ This race-ready full-suspension mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build, which allows you to benefit from its increased stiffness and strength without any weight penalty. Lightweight and responsive, Nukeproof has also kitted out this model with updated geometry for smooth handling, while its internally piped cable routing allows for a sleek, clean finish. Developed for the most demanding of terrain conditions, this version also comes equipped with a Factory Series Fox Float X2 rear shock for increased traction, tuneability and smoothness. Coming complete with 148x12mm Boost rear hub spacing and a range of updated features, this carbon frame is a perfect choice of upgrade for completing your enduro bike build. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Carbon Fibre Full-Suspension Enduro MTB Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.  After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate Enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new UD Carbon chassis ·        Improved suspension kinematics  ·        Tube-In-Tube design for easy cable installation  ·        All new geometry   ·        Optimised sizing/fit - Small to XXL ·        SRAM UDH  ·        Room for a 750ml water bottle inside the main front triangle    The updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angles which are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.    Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 275 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre frame Internally piped cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS. Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) Headset: Nukeproof, 44-56 IITS Weight: 3.88Kgs/8.55lbs (Tubeless)
    • Shop: Wiggle DACH
    • Price: 2999.99 EUR excl. shipping
  • Thumbnail
    Nukeproof - Mega 275 Carbon Frame - Black - Rahmen - Full Suspension MTB
    ◌ This race-ready full-suspension mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build, which allows you to benefit from its increased stiffness and strength without any weight penalty. Lightweight and responsive, Nukeproof has also kitted out this model with updated geometry for smooth handling, while its internally piped cable routing allows for a sleek, clean finish. Developed for the most demanding of terrain conditions, this version also comes equipped with a Factory Series Fox Float X2 rear shock for increased traction, tuneability and smoothness. Coming complete with 148x12mm Boost rear hub spacing and a range of updated features, this carbon frame is a perfect choice of upgrade for completing your enduro bike build. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Carbon Fibre Full-Suspension Enduro MTB Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.  After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate Enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new UD Carbon chassis ·        Improved suspension kinematics  ·        Tube-In-Tube design for easy cable installation  ·        All new geometry   ·        Optimised sizing/fit - Small to XXL ·        SRAM UDH  ·        Room for a 750ml water bottle inside the main front triangle    The updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angles which are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.    Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 275 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre frame Internally piped cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS. Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) Headset: Nukeproof, 44-56 IITS Weight: 3.88Kgs/8.55lbs (Tubeless)
    • Shop: Wiggle DACH
    • Price: 2999.99 EUR excl. shipping
  • Thumbnail
    Nukeproof - Mega 275 Carbon Frame - Black - Rahmen - Full Suspension MTB
    ◌ This race-ready full-suspension mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build, which allows you to benefit from its increased stiffness and strength without any weight penalty. Lightweight and responsive, Nukeproof has also kitted out this model with updated geometry for smooth handling, while its internally piped cable routing allows for a sleek, clean finish. Developed for the most demanding of terrain conditions, this version also comes equipped with a Factory Series Fox Float X2 rear shock for increased traction, tuneability and smoothness. Coming complete with 148x12mm Boost rear hub spacing and a range of updated features, this carbon frame is a perfect choice of upgrade for completing your enduro bike build. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Carbon Fibre Full-Suspension Enduro MTB Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.  After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate Enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new UD Carbon chassis ·        Improved suspension kinematics  ·        Tube-In-Tube design for easy cable installation  ·        All new geometry   ·        Optimised sizing/fit - Small to XXL ·        SRAM UDH  ·        Room for a 750ml water bottle inside the main front triangle    The updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angles which are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.    Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 275 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre frame Internally piped cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS. Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) Headset: Nukeproof, 44-56 IITS Weight: 3.88Kgs/8.55lbs (Tubeless)
    • Shop: Wiggle DACH
    • Price: 2999.99 EUR excl. shipping
  • Thumbnail
    Nukeproof - Mega 275 Carbon Frame - Black - Rahmen - Full Suspension MTB
    ◌ This race-ready full-suspension mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build, which allows you to benefit from its increased stiffness and strength without any weight penalty. Lightweight and responsive, Nukeproof has also kitted out this model with updated geometry for smooth handling, while its internally piped cable routing allows for a sleek, clean finish. Developed for the most demanding of terrain conditions, this version also comes equipped with a Factory Series Fox Float X2 rear shock for increased traction, tuneability and smoothness. Coming complete with 148x12mm Boost rear hub spacing and a range of updated features, this carbon frame is a perfect choice of upgrade for completing your enduro bike build. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Carbon Fibre Full-Suspension Enduro MTB Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.  After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate Enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new UD Carbon chassis ·        Improved suspension kinematics  ·        Tube-In-Tube design for easy cable installation  ·        All new geometry   ·        Optimised sizing/fit - Small to XXL ·        SRAM UDH  ·        Room for a 750ml water bottle inside the main front triangle    The updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angles which are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.    Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 275 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre frame Internally piped cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS. Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) Headset: Nukeproof, 44-56 IITS Weight: 3.88Kgs/8.55lbs (Tubeless)
    • Shop: Wiggle DACH
    • Price: 2999.99 EUR excl. shipping
  • Thumbnail
    Nukeproof - Mega 275 Carbon Frame - Black - Rahmen - Full Suspension MTB
    ◌ This race-ready full-suspension mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build, which allows you to benefit from its increased stiffness and strength without any weight penalty. Lightweight and responsive, Nukeproof has also kitted out this model with updated geometry for smooth handling, while its internally piped cable routing allows for a sleek, clean finish. Developed for the most demanding of terrain conditions, this version also comes equipped with a Factory Series Fox Float X2 rear shock for increased traction, tuneability and smoothness. Coming complete with 148x12mm Boost rear hub spacing and a range of updated features, this carbon frame is a perfect choice of upgrade for completing your enduro bike build. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Carbon Fibre Full-Suspension Enduro MTB Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.  After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate Enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new UD Carbon chassis ·        Improved suspension kinematics  ·        Tube-In-Tube design for easy cable installation  ·        All new geometry   ·        Optimised sizing/fit - Small to XXL ·        SRAM UDH  ·        Room for a 750ml water bottle inside the main front triangle    The updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angles which are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.    Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 275 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre frame Internally piped cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS. Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) Headset: Nukeproof, 44-56 IITS Weight: 3.88Kgs/8.55lbs (Tubeless)
    • Shop: Wiggle DACH
    • Price: 2999.99 EUR excl. shipping
  • Thumbnail
    Vitus E Sommet 27 VR Mountainbike (2021) Burnt Charcoal - E-Mountainbikes
    ◌Das E-Sommet 297 VR ist ein elektronisches vollgefedertes E-Bike von Vitus. Dieses VR-Modell verfügt über einen Aluminiumrahmen mit X-Fusion-Federung, einen elektronischen Shimano E7000-Antrieb mit Shimano Deore 11-Gang-Getriebe und hydraulische Scheibenbremsen. Dieses Fahrrad ist so optimiert, dass es überall außergewöhnliche Geschwindigkeit, Agilität und Kontrolle bietet und gleichzeitig für Geländefahrten entwickelt und ausgestattet ist. Außerdem verfügt es über maßgeschneiderte WTB/Vitus-Räder, die mit Maxxis-Reifen umwickelt sind, und eine Brand-X Ascend-Sattelstütze mit absenkbarer Sattelstütze. Außerdem verfügt es über ein 29-Zoll-Rad vorne und ein 27,5-Zoll-Rad hinten - dies bedeutet, dass die hinteren Kettenstreben für eine überlegene Kontrolle kürzer bleiben können, während das 29-Zoll-Vorderrad es ermöglicht, überall außergewöhnliches Tempo und Kontrolle zu behalten. Die Konstrukteure von Vitus, die mit der vorherigen Generation des E-Sommet mehrfach ausgezeichnet wurden, wollten die beliebten Fahreigenschaften weiterentwickeln und gleichzeitig die wichtigsten Funktionen modernisieren. Vitus wollte das verdoppeln, was Kunden an früheren E-Sommet-Modellen liebten. Mit dem neuen E-Sommet können Sie alles tun, was Sie mit Ihrem Enduro-Fahrrad tun können, aber nur mehr davon... Alle Vorteile eines großen Enduro-Reisefahrrads mit Unterstützung auf dem Rückweg. Als Vitus mit der Neuentwicklung seiner E-Sommet-Plattform begann, hatten sie zwei Hauptziele: 1. Ihr preisgekröntes E-Sommet noch besser zu machen mit einem internen Batterierahmen, einer aktualisierten Geometrie und einer verbesserten Fahrwerkskinematik. 2. Kombinieren der besten Komponenten der Branche mit ihrem neuen E-Sommet-Rahmen, um das leistungsfähigste E-MTB auf dem Markt anzubieten und gleichzeitig seinen Kunden treu zu bleiben, indem Sie es zu einem erschwinglichen Preis anbieten. Internes Batterierahmen-Design Das beliebte E-Sommet wurde jetzt mit einem integrierten Batteriedesign aktualisiert, das alle Aspekte des Systems in den Rahmen integriert. Die Ingenieure entwarfen eine Batterieklappe am Boden des Unterrohrs. Durch die Erhöhung der Festigkeit in Schlüsselbereichen und die Platzierung auf einer ebenen Fläche wurde sichergestellt, dass der Rahmen die gesamte Fahrleistung beibehielt. Geometrie aktualisiert Vitus hat die Geometrie aktualisiert, um ein sichereres Fahrgefühl zu erzielen. Wichtige änderungen sind lockere Kopfwinkel und ein geringerer Industrielager-Abfall, um das technische Klettern zu unterstützen. Sie haben auch den effektiven Sitzrohrwinkel steiler gemacht und ihn mit zunehmender Größe zunehmend steiler gemacht. Dies stellt sicher, dass jede Rahmengröße eine optimale, durchhängende Sattelposition ohne Kompromisse aufweist. Durch Messen der Sattelhöhe am Sattel lag Vitus auf der Position des Sattels relativ zum Tretlager, um sicherzustellen, dass Sie beim Durchhängen des Fahrrads eine optimale Tretposition hatten. Der Grund, warum sie den Sitzwinkel bei den größeren Rahmengrößen steiler machten, bestand darin, sicherzustellen, dass der Sattelrückstand nicht zu weit hinter dem Tretlager lag. Verbesserte Federungsleistung Vitus hat die gleiche feste untere Stoßdämpferhalterung wie die Sommet & Escarpe verwendet, wodurch sie auch die Fahrwerkskinematik verfeinern konnten. Eine verbesserte konsistente progressive Hebelkurve sorgt für ein gleichmäßigeres Gefühl, Unterstützung und Dämpfung. Eigenschaften: Rahmen:E-Sommet 6061-T6 Aluminium mit 167 mm Federweg - Vollständige interne Kabelführung, nachträglich montierte Scheibenbremse, Boost-Nabenabstand, SRAM UDH-Aufhänger, interne Batteriehalterung für interne 504- und 630 WH-Batterien. Gabel:X-Fusion Trace 36 RC 170mm 29" 44mm Versatz Dämpfer hinten:X-Fusion O2 Pro R 205x65mm High Volume Trunnion Halterung B-Tune Antrieb: Shimano E7000 Akku: Shimano E8035 504 Wh Fahrradcomputer:Shimano E7000 Assist Schalter:Shimano E7000 Tretlager:Shimano BB52 68/73 mm Kurbelgarnitur:Shimano E8000 165mm Kette:KMC e11s Schaltwerk: Shimano Deore M5120 11-fach Kassette: SunRace CSMS7 11-51 Zähne, 11-fach Schalthebel:Shimano Deore M5100 11-fach Bremsen: Shimano MT520 Hydraulik-Scheibenbremse Bremsscheiben:Shimano SM-RT66 oder Brakco DR-02 203mm, 6 Loch Laufräder:WTB ST Light i30/ Vitus KT Naben Reifen:Maxxis Assegai Maxx Grip DD 29x2,5 "" / Maxxis High Roller II Maxx Terra DD 27,5x2,5"" Steckachsen:SRAM Maxle Stealth 12 x 148 mm, 180 mm x 13 mm. M12x1.0 W / UDH Schaltauge Vorbau: Nukeproof Neutron Vorbau, 45 mm, 31,8 mm Lenker:Nukeproof Horizon 31,8 mm Lenker S / M: 12 mm Rise 780 mm Breite L / XL: 25 mm Rise 800 mm Breite Sattelstütze:Brand-X Ascend Dropper Sattelstütze 34,9 mm - S: 125 mm Gefälle; M: 150 mm Absenkung; L / XL: 170 mm Absenkung Sattel:Nukeproof Neutron oder Nukeproof Trail Sitzschraube: Vitus Schraube, 36,4 mm Schaltauge: SRAM UDH Um ein Explosionsdiagramm zu sehen, das alle kompatiblen Ersatzteile für diesen Rahmen zeigt, bitte hier klicken. Bitte beachten Sie: Aufgrund von Schwankungen in der Fahrradlieferkette können wir die Spezifikation der mit diesem Fahrrad gelieferten Komponenten geringfügig ändern. In diesem Fall haben wir das alternative Produkt in der Spezifikationstabelle aufgeführt und sichergestellt, dass es der Standardkomponente entweder gleichwertig oder überlegen ist. Gebaut, abgestimmt und fahrbereit Jedes Fahrrad wird von den qualifizierten Fahrradmechanikern bei Wiggle montiert, getestet und feineingestellt. Damit wird sichergestellt, dass es in einem optimalen Zustand bei Ihnen ankommt. Wir liefern alle Fahrräder mit einem Satz Kunststoffpedalen, einem Pedalschlüssel und einem Multitool-Set. Finden Sie heraus, welche Größe zu Ihnen passt, indem Sie auf die Registerkarte Größentabelle klicken.
    • Shop: Wiggle DACH
    • Price: 4599.99 EUR excl. shipping
  • Thumbnail
    Vitus E Sommet 27 VR Mountainbike (2021) Burnt Charcoal - E-Mountainbikes
    ◌Das E-Sommet 297 VR ist ein elektronisches vollgefedertes E-Bike von Vitus. Dieses VR-Modell verfügt über einen Aluminiumrahmen mit X-Fusion-Federung, einen elektronischen Shimano E7000-Antrieb mit Shimano Deore 11-Gang-Getriebe und hydraulische Scheibenbremsen. Dieses Fahrrad ist so optimiert, dass es überall außergewöhnliche Geschwindigkeit, Agilität und Kontrolle bietet und gleichzeitig für Geländefahrten entwickelt und ausgestattet ist. Außerdem verfügt es über maßgeschneiderte WTB/Vitus-Räder, die mit Maxxis-Reifen umwickelt sind, und eine Brand-X Ascend-Sattelstütze mit absenkbarer Sattelstütze. Außerdem verfügt es über ein 29-Zoll-Rad vorne und ein 27,5-Zoll-Rad hinten - dies bedeutet, dass die hinteren Kettenstreben für eine überlegene Kontrolle kürzer bleiben können, während das 29-Zoll-Vorderrad es ermöglicht, überall außergewöhnliches Tempo und Kontrolle zu behalten. Die Konstrukteure von Vitus, die mit der vorherigen Generation des E-Sommet mehrfach ausgezeichnet wurden, wollten die beliebten Fahreigenschaften weiterentwickeln und gleichzeitig die wichtigsten Funktionen modernisieren. Vitus wollte das verdoppeln, was Kunden an früheren E-Sommet-Modellen liebten. Mit dem neuen E-Sommet können Sie alles tun, was Sie mit Ihrem Enduro-Fahrrad tun können, aber nur mehr davon... Alle Vorteile eines großen Enduro-Reisefahrrads mit Unterstützung auf dem Rückweg. Als Vitus mit der Neuentwicklung seiner E-Sommet-Plattform begann, hatten sie zwei Hauptziele: 1. Ihr preisgekröntes E-Sommet noch besser zu machen mit einem internen Batterierahmen, einer aktualisierten Geometrie und einer verbesserten Fahrwerkskinematik. 2. Kombinieren der besten Komponenten der Branche mit ihrem neuen E-Sommet-Rahmen, um das leistungsfähigste E-MTB auf dem Markt anzubieten und gleichzeitig seinen Kunden treu zu bleiben, indem Sie es zu einem erschwinglichen Preis anbieten. Internes Batterierahmen-Design Das beliebte E-Sommet wurde jetzt mit einem integrierten Batteriedesign aktualisiert, das alle Aspekte des Systems in den Rahmen integriert. Die Ingenieure entwarfen eine Batterieklappe am Boden des Unterrohrs. Durch die Erhöhung der Festigkeit in Schlüsselbereichen und die Platzierung auf einer ebenen Fläche wurde sichergestellt, dass der Rahmen die gesamte Fahrleistung beibehielt. Geometrie aktualisiert Vitus hat die Geometrie aktualisiert, um ein sichereres Fahrgefühl zu erzielen. Wichtige änderungen sind lockere Kopfwinkel und ein geringerer Industrielager-Abfall, um das technische Klettern zu unterstützen. Sie haben auch den effektiven Sitzrohrwinkel steiler gemacht und ihn mit zunehmender Größe zunehmend steiler gemacht. Dies stellt sicher, dass jede Rahmengröße eine optimale, durchhängende Sattelposition ohne Kompromisse aufweist. Durch Messen der Sattelhöhe am Sattel lag Vitus auf der Position des Sattels relativ zum Tretlager, um sicherzustellen, dass Sie beim Durchhängen des Fahrrads eine optimale Tretposition hatten. Der Grund, warum sie den Sitzwinkel bei den größeren Rahmengrößen steiler machten, bestand darin, sicherzustellen, dass der Sattelrückstand nicht zu weit hinter dem Tretlager lag. Verbesserte Federungsleistung Vitus hat die gleiche feste untere Stoßdämpferhalterung wie die Sommet & Escarpe verwendet, wodurch sie auch die Fahrwerkskinematik verfeinern konnten. Eine verbesserte konsistente progressive Hebelkurve sorgt für ein gleichmäßigeres Gefühl, Unterstützung und Dämpfung. Eigenschaften: Rahmen:E-Sommet 6061-T6 Aluminium mit 167 mm Federweg - Vollständige interne Kabelführung, nachträglich montierte Scheibenbremse, Boost-Nabenabstand, SRAM UDH-Aufhänger, interne Batteriehalterung für interne 504- und 630 WH-Batterien. Gabel:X-Fusion Trace 36 RC 170mm 29" 44mm Versatz Dämpfer hinten:X-Fusion O2 Pro R 205x65mm High Volume Trunnion Halterung B-Tune Antrieb: Shimano E7000 Akku: Shimano E8035 504 Wh Fahrradcomputer:Shimano E7000 Assist Schalter:Shimano E7000 Tretlager:Shimano BB52 68/73 mm Kurbelgarnitur:Shimano E8000 165mm Kette:KMC e11s Schaltwerk: Shimano Deore M5120 11-fach Kassette: SunRace CSMS7 11-51 Zähne, 11-fach Schalthebel:Shimano Deore M5100 11-fach Bremsen: Shimano MT520 Hydraulik-Scheibenbremse Bremsscheiben:Shimano SM-RT66 oder Brakco DR-02 203mm, 6 Loch Laufräder:WTB ST Light i30/ Vitus KT Naben Reifen:Maxxis Assegai Maxx Grip DD 29x2,5 "" / Maxxis High Roller II Maxx Terra DD 27,5x2,5"" Steckachsen:SRAM Maxle Stealth 12 x 148 mm, 180 mm x 13 mm. M12x1.0 W / UDH Schaltauge Vorbau: Nukeproof Neutron Vorbau, 45 mm, 31,8 mm Lenker:Nukeproof Horizon 31,8 mm Lenker S / M: 12 mm Rise 780 mm Breite L / XL: 25 mm Rise 800 mm Breite Sattelstütze:Brand-X Ascend Dropper Sattelstütze 34,9 mm - S: 125 mm Gefälle; M: 150 mm Absenkung; L / XL: 170 mm Absenkung Sattel:Nukeproof Neutron oder Nukeproof Trail Sitzschraube: Vitus Schraube, 36,4 mm Schaltauge: SRAM UDH Um ein Explosionsdiagramm zu sehen, das alle kompatiblen Ersatzteile für diesen Rahmen zeigt, bitte hier klicken. Bitte beachten Sie: Aufgrund von Schwankungen in der Fahrradlieferkette können wir die Spezifikation der mit diesem Fahrrad gelieferten Komponenten geringfügig ändern. In diesem Fall haben wir das alternative Produkt in der Spezifikationstabelle aufgeführt und sichergestellt, dass es der Standardkomponente entweder gleichwertig oder überlegen ist. Gebaut, abgestimmt und fahrbereit Jedes Fahrrad wird von den qualifizierten Fahrradmechanikern bei Wiggle montiert, getestet und feineingestellt. Damit wird sichergestellt, dass es in einem optimalen Zustand bei Ihnen ankommt. Wir liefern alle Fahrräder mit einem Satz Kunststoffpedalen, einem Pedalschlüssel und einem Multitool-Set. Finden Sie heraus, welche Größe zu Ihnen passt, indem Sie auf die Registerkarte Größentabelle klicken.
    • Shop: Wiggle DACH
    • Price: 4599.99 EUR excl. shipping

Similar searches: